Detail Lab MTB Snow Foam Twin Pack | 2x 500ml Fluids + 2L Sprayer

Ah, got it! My mistake on the count. You have two bottles of Snow Foam but one single pump sprayer to use them with.

Here is the corrected version written exactly for that specific setup:

The Extended Trail Pack: Velocity MTB Snow Foam System

Tired of blasting your frame bearings with a high-pressure jet wash or scratching up your paint with a muddy sponge after a gritty session on the trails?

The Velocity MTB Snow Foam System is the ultimate touchless cleanup setup designed for mountain bikes, gravel rigs, and e-bikes. This extended pack gives you a double supply of our premium, bike-safe snow foam paired with a heavy-duty pump sprayer so you can melt away trail muck, clay, and grit over multiple deep cleans with zero hassle.

No pressure washer required. Just total convenience that keeps your suspension seals, pivot bearings, and custom graphics perfectly safe.

Why Mountain Bikers Need This Kit:

• Double the Wash Power: With two bottles of concentrated Snow Foam, you have enough deep-cleaning fluid to tackle dozens of post-ride washes.

• Save Your Bearings: Pressure washers drive water deep into expensive pivot bearings, bottom brackets, and suspension seals, causing premature wear. This system cleans deeply using high-cling foam and a standard garden hose rinse.

• Stop the Scratches: Mud and grit act like sandpaper when wiped with a sponge. This touchless foam system encapsulates and lifts abrasive trail grit completely off the frame before you ever touch it.

• E-Bike Safe Cleaning: Deliver a precise, uniform blanket of foam to safely clean delicate electrical components, motor casings, and battery bays without risk of high-pressure water ingress.

What’s Included in the Box:

• 2 x Snow Cannon Snow Foam (500ml): Double the supply of our highly concentrated, ultra-slick foaming formula that encapsulates abrasive dirt, mud, and trail grime.

• 1 x Velocity V2 2L Pump Sprayer: Upgraded, heavy-duty manual pump sprayer featuring chemical-resistant seals and an adjustable fan nozzle for perfect frame coverage.

How To Use It After a Ride:

Step 1: Prep and Pump

• Pour roughly 50ml to 100ml from your first bottle of Snow Cannon Snow Foam into your free 2L Velocity Pump Sprayer, fill the rest with water, and twist the cap tight. Give it a few quick pumps to build up heavy pressure.

Step 2: Foam the Frame

• Spray a thick, clingy blanket of foam across the entire bike—starting from the muddy lower linkages up to the handlebars.

Step 3: Dwell and Rinse

• Let the foam sit on the bike for 3–5 minutes. Watch it break down stubborn clay, grit, and trail muck. Grab a soft brush for heavily caked tires or cassettes if needed, then simply rinse it all away with a gentle garden hose. Store your second bottle away until you need a top-up.